How to Make a Duck Call: Step by Step in Realtime

A reliable duck call is among the most crucial tools required for duck searching. This little instrument, when utilized effectively, will allow you to mimic not merely one, but a number of the different noises that ducks use to interact with each other.

Here, we are going to teach you how to make a duck call and how to tune it when you are completed.


Duck calls can be made of different materials. Today, we are going to teach you how to make a duck call out of wood. Different woods will produce various noise, so if you are a skilled duck hunter, you may want to consider whether pine or hardwood is ideal for you. If this is your first duck call, don’t worry about wood choice just yet.

How to make a duck call

A duck call is genuinely comprised of 2 parts: the barrel, and the insert. The barrel is the larger end of the duck call. It is one piece of wood, shaped to your taste. This is the end of the instrument that you will blow into to make the sound of a duck.

The second part of a duck call is the insert. This piece is a bit harder to construct and is what develops the sound of a duck. The advertisement features a long narrow tone board with a cork and reed and an exhaust bell. When fully built, the tone board is placed into the barrel, so just the barrel and exhaust are showing.

Watch the video:

Making a duck call is relatively basic. But making a duck call that is tuned completely and suits your requirements may take a bit more fiddling. Once you’ve mastered it, utilizing a duck call will significantly enhance your duck hunting skills and the pleasure you get out of each duck hunt. Today we are going to explain how to make a duck call with one reed and two easy body parts.


To make a great duck call, you’ll require to head out to your nearest hardware store and get a few articles.


Do not stress, they are all simple to discover, and if you’re already a passionate DIY-er, you may even have these in the shed.

  • 2 Wood Blanks or Wood Dowels: Either square wood blocks two × 2″ or a 2″ diameter wood dowel will do. The length should be between 3-4″. You will need to drill a 5/8″ hole on one end to position the wood on the lathe.
  • Reeds: The reed is what makes the noise of the duck contact your instrument Reeds usually are made of mylar or metal, and the thinner a cane is, the easier it will be to “play.” Some hunters recommend utilizing instrument reeds, such as the oboe or clarinet reeds, which you can pick up at your local musical instrument.
  • Cork: cork or rubberized cork is utilized to hold the reeds in the call.
  • O-rings: these are used to keep the insert in the barrel.
  • Free products: metal rings to keep the wood from cracking on the outside, and inlays to utilize as decoration for your unique call.


Making a duck call may call for some details devices; however, at a neighborhood hardware outlet, you must manage to discover budget-friendly tools to fit your budget.

Additionally, depending upon your spending plan and level of interest, you might likely cut some edges and overlook some tools.


However, what you gain in cost cuts, you drop in high quality. If you want a well-tuned, active duck phone call, you’re far better off making sure you possess all the devices you require.

  • Lathe: This is the best vital device required in the process of constructing a duck call. For those readers that perform certainly not recognize, a cutter is a straightforward machine that is going to spin the body system of your request, permitting you to form it to your taste.
    Lathes come in an assortment of measurements, from mini to industrial. The turret that you opt for depends upon your targets and also what you need to utilize it for. Perform your research in advance if you’re nervous, and bring in the appropriate choice.
  • Wood Tools: Given that our company is bringing in a wooden duck call today, it makes sense that we need to get wood resources to team up with the material. These devices can be discovered in a wide variety of different sizes and shapes.
    The much larger resources benefit, creating the pivoted condition of the physical body of your call, while the more exceptional delicate tools may be utilized on the particular job. These tools may vary coming from economical to hundreds of dollars.
    Once more, what you choose to purchase depends on your necessities as well as targets. If you want to make one duck call and also stop, you possibly don’t require to spend hundreds. If you’re going to come to be an additional craftsmen, go forward and commit!
  • Mandel: The Mandel is the resource that is going to hold the physical body of your get in touch with the turret while you are forming it. A Mandel is often 5/8″ diameter; however, whatever measurements you have, are sure the pin or even empty that are going to be the body system of your duck call has the same sized gap bored into it.
    Place the Mandel right into solitary confinement, and after that, connect the Mandel to the headstock on your lathe. This will certainly secure your contact location; thus, you can easily mold it as you such as.
  • Insert Jig: This device will hold your insert and permit you to cut correctly and also mold it.
  • Band Saw
  • Drill chuck accessory for the turret
    5/8″ drill little, 1/4″ rotary tool bit, stoppered bit/a tapered little bit


The actual process of making the duck calls, making up the physical body, and also putting the assemble, is quite necessary.

The even more challenging components are tuning your duck call, discovering how to use it, and produce the noises that you need. Without further confusion, here are the measures of making a duck call.

  1. However performed, pierce a small 5/8″ hole via the center of your empty or pin. It should be punched all the way through. The length of the blank that you can use relies on the audio you desire to make at the end. As a basic guideline, the longer the barrel, the much deeper the noise.
  2. Place the spindle into the drilled empty, and also, using the mandrel, connect the blank to the turret.
  3. Using some of the wooden tools, the gouge resource, you can shape the empty into a round form. If you are using a dowel, it may already be round, so bypass this action.
  4. Decide on which form you would like. This is up to you, as well as the design of choice will certainly not drastically transform the sound of your call, therefore generate a design that is desirable to you. Using the timber devices, create this shape along with the physical body still on the lathe. If you place a metal band on completion of your call barrel, you can easily shape the barrel to the measurements of the group. Use a caliper to make the completion of the barrel match the dimension of the band. Then it is done, immediately wrap the end of the barrel with the group and also press it on.
  5. End up the barrel through sanding it till it hits your intended level of smoothness.
  6. Next, the insert needs to be produced. This is the portion of the decision that will be in charge of the noise it develops, so take your time and also carefully follow the steps entailed.
  7. Begin by switching the insert on the turret. You’ll desire to mold the exhaust, which is the completion part of the advertisement where the noise departures. Mold it to a pivoted shape. At that moment, concentrate on transforming the rest of the insert up to precisely 5/8 to ensure it will match snugly into the barrel. At this moment, the advertisement might be more extended than you need; it is all right. During this transformation, you can create a slender channel, where the system of the insert satisfies the exhaust. This network is going to conduct your o-ring later.
  8. The next action is to mold the exhaust alarm. Along with the insert still on the lathe, condition the exhaust alarm into the pivoted condition of your selection. Just see to it to have it blend from 5/8″to ensure it will certainly suit well into the barrel. Hold back on sanding as well as finishing the exhaust for now.
  9. Try to pierce the mood station. Place a rotary tool chuck onto the tailstock of the turret. Use a 1/4″ drill bit in the rotary tool chuck as well as spin the insert on the lathe. In this manner, you can easily pierce the tone channel to the proper intensity, starting at the end. Bore up until you are 1/2″ from completion of the tone board. If you are drilling to the right depth, make an effort to place a part of the strip or even a cork on your drill little bit to represent the correct deepness.
  10. Blend the inside of the exhaust alarm. Use of a stepper little or a tapered little bit on the drill chuck and also decrease the end of the channel of the bell.
  11. Now, sand and end up the insert.
  12. Cut the insert by using the tone panel jig as well as band saw with a much smaller cutter. Reduce from scratch of the supplement down of the stopper step after that cut entirely down at the face of the cork notch.
  13. Now our experts will recommend using just a single reed for this “how-to.” Take a piece of the stopper as well as your solitary reed, and match all of them right into the stopper mark. You will want the bend of the grass to the experience of the lumber of the insert.
    Discover the bend through resting the splint, in standing, on a dining table as well as pushing down lightly with your hands. The brace will regularly flex in one path. When you place the splint into your insert, possess the bend encountering far from the wall surface. Tuning the call after that entails usually reshaping the reed, either briefer or longer. Complete by clipping the corners at a 45-degree slant.
  14. When the stopper, as well as splint, remain in location, slide the o-ring onto the insert. You can make use of a marker or even much smaller implement to select the o-ring up and accommodate it comfortably into the slender network you produced for it in step 6.
  15. Move the tuned insert into the gun barrel and also impact. Does it seem like a duck? Perhaps, along with a little practice, you ought to have the capacity to acquire a duck-like noise.
  16. However, what happens if it does not sound like a duck!? There can be a handful of problems.

One problem is that your reed may be too brief or too long. Attempt along with a couple of various reed durations and see if that assists.

Conversely, you may have punched your tone network unfathomable, or even the angle of your radius also steep. You may require to make an effort once again by hitting an extra insert. Take a look at even more pointers on how to utilize a duck call in our previous write-up on this subject matter.


As with many things, it will take time as well as knowledge to become able to make a top-quality duck call in one shot. Endure yourself, and be willing to exercise time and again at bring in the calls and knowing just how to cut a well-tuned insert in your initial go.

Don’t quit, because there is something unquestionably delighting concerning heading out into the wild and calling to ducks with a musical instrument that you crafted by your hands. Good luck!

Before leaving on your upcoming duck searching vacation, browse through our must-read post on how to make use of a duck hire four straightforward actions.


Leave a Comment